Jeff Green No. 66 Best Buy Chevrolet Impala
SS Martinsville Speedway Preview
MOST RECENT RACE AT MARTINSVILLE: In the October, 2006,
NEXTEL Cup Series race at Martinsville Speedway, Jeff Green
qualified eighth and finished eighth, marking his second top-10
finish of the 2006 season.
Earlier in the week, the management of Haas CNC Racing promoted
Holly to the crew chief position with Green’s No. 66
Best Buy Chevrolet team. Holly had been working as crew chief
of Johnny Sauter’s No. 00 Haas CNC Racing NASCAR Busch
Series team.
That race marked the first weekend Green and Crew Chief Harold
Holly had worked together since they dominated the NASCAR Busch
Series as driver and crew chief, respectively, of the No. 10
PPC Racing entry, from 1999-2001.
CHASSIS: Chassis No. 406 – Built by Hendrick
Motorsports, this chassis is brand new. On Monday, March 19th,
the Best Buy team spent several hours “shaking down” this
car at South Georgia Motorsports Park, near Valdosta, Ga. The
team brought it to Bristol Motor Speedway as the backup car
for last weekend’s NEXTEL Cup Series race.
Q&A WITH DRIVER JEFF GREEN:
Several drivers are complaining about the Car of Tomorrow
(COT). Given how things went last weekend at Bristol for
your team, are you a fan of the COT? “Yeah. I mean,
I’m more confident with where our team is at with (the
COT) than I am with the other car right now. I was excited
about it. I’ve been used to sliding around, so it really
wasn’t much different for me, if that’s what
(the other drivers) were doing.
“It’s still a race car. It’s still got four
tires, four shocks, four springs, and you still have to tune
on it to get it the best you can. With the tire situation the
way it is, as hard as (the tires) are, I think the other cars
would have slid around as much as (the COT) did. I’m
sure it will be much different on a mile-and-a-half track,
but on a short track, I couldn’t tell much difference.”
Harold Holly (crew chief of the No. 66) said you had to
bring out setup notes from four or five years ago and refer
to them to set up the COT. Do you think that works in the
favor of a veteran driver like yourself, as opposed to some
of the younger drivers who weren’t around five years
ago? “I don’t know. In terms of the percentage
of races I’ve driven, I’ve driven more of the
older type setups like we had last weekend, with limited
travel on the front end and stuff like that. It’s only
been the last three or four years where we’ve been
doing what we do on the other cars, with the coil binding.
I don’t know if it helps or not, but I’ll take
any advantage I can get, so I hope it does work in my favor.”
Is it too early to grade the COT, or do you think it’s
going to help competition in the way NASCAR hopes it will? “I
think it’s going to be great (for the sport). Anytime
you can make the car safer and make the competition closer
because everyone’s the same, it’s going to bring
the driver back into the equation even more, and the teams
with more resources are hopefully not going to excel as much
as they have.
“NASCAR’s got the teams in a much smaller box
now than they have in the last three or four years, and they
police that car so much, it’s much harder to bend the
rules or find that gray area. It’s kind of like buying
a kit car, basically. If NASCAR does what they say they’re
going to do and keep policing the (COT) like they are, it’s
going to give the teams without as much funding and without
as many resources the chance to be much more competitive than
they have been for the last three or four years.”
Martinsville is a track where you’ve run well.
Do you think the short tracks suit your driving style more
than the 1.5-mile tracks? “I think we’ve
performed better at the short tracks lately just because
we’ve hit the setup closer or had better race cars
at those places. I enjoy them all. I’ve won at big
tracks and short tracks, so it really doesn’t matter
to me where we’re going on any given weekend.
“I like Martinsville, but I wouldn’t say it’s
one of my favorite race tracks. I like that you’re able
to sling your car around a lot more. As a driver, it puts it
back in your hands and how you drive can definitely make or
break what kind of finish you produce that day. I like that.”
With the concern over the potential fragility of the front
end splitter on the COT, do you think there will be less
bumping and banging than in the past at Martinsville? “I
doubt it. There will still be rooting and gouging. I think
you’ll see what you saw at Bristol, which is that there
will be a lot of guys who are just off on their setups. There
will be some who hit it right on, and there will be a few
in between. I think that’s why the field at Bristol
got spread out as much as it did, and you didn’t see
guys take as many chances, maybe.
“With the other car, there would have probably have
been 20 or 25 guys on the lead lap, and I think there were
only 12 or 14 (at Bristol). I think a lot of guys missed (the
right setup) and couldn’t get a handle on it, and I think
you’ll see the same thing at Martinsville.”
How much of a relief is it to be comfortably in the top-35
in points this weekend? “It’s one less thing
you have to worry about, so it definitely makes Friday a
lot easier, but you still have to worry about how you perform
on race day. This early in the year, all it takes is one
bad day and you can easily be on the outside looking in.
With the way we’ve been on the mile-and-a-half tracks
this year, we really need a good run this weekend. If we
can put a few top-10 or top-15 finishes together and really
give ourselves some breathing room, it’ll be a much
better situation, but for now we’re just taking it
one race at a time.”
JEFF GREEN’S HISTORY AT MARTINSVILLE SPEEDWAY: In
13 Cup Series starts at Martinsville Speedway, Jeff Green’s
best starting spot was a sixth-place qualifying effort in the
Sept., 1998, event, when Green drove for Felix Sabates. His
best finish came in Oct., 2004, when he finished seventh while
driving the No. 43 car for Petty Enterprises.
HAAS CNC RACING’S HISTORY AT MARTINSVILLE SPEEDWAY: In
eight Cup Series starts at Martinsville, the Haas CNC Racing
team has qualified in the top-15 five times. The team’s
best qualifying effort was a fourth-place run by driver Ward
Burton in Oct., 2004. The team’s best finish was the
eighth-place finish Jeff Green posted in the October, 2006,
event.
BEST BUY FUN FACT:
A number of musical artists born in Virginia have CD’s
available at Best Buy retail locations, and from www.BestBuy.com,
including:
- Stewart
Copeland – Born
in Chesapeake, Va., this drummer is about to embark
on a 30th-anniversary reunion tour with his bandmates
in The Police. Their tour, which is selling out shows
at a record pace, is sponsored by Best Buy.
- Roy
Clark- Guitar
virtuoso from Meaherrin, Va. Best known as one of
the hosts of the classic Country-flavored variety
show, “Hee Haw.”
- Robert
Cray – Electric
blues/rock guitarist from Newport News, Va., who
is currently the opening act on Eric Clapton’s
tour.
- Clarence
Clemons – From
Norfolk, Va., this saxophonist has played with Bruce
Springsteen's E Street Band for some 30
years.
- Wayne
Newton – “Mr.
Las Vegas” was actually born in Norfolk, Va.
BEST BUY LOCATIONS: Using the “Store Locator” feature
at www.BestBuy.com shows there are 10 Best Buy locations in
Virginia, including stores in Lynchburg, Charlotesville, Richmond,
two locations in Glen Allen, Colonial Heights, Roanoke, Fredericksburg,
Manassas and Woodbridge.
Jeff Green- Martinsville Speedway Cup Series Statistics
Date |
Start |
Finish |
Team Owner |
Laps |
Status |
9/28/97 |
33 |
30 |
Gary
Bechtel |
464/500 |
Running |
4/20/98 |
41 |
17 |
Chuck
Rider |
499/500 |
Running |
9/17/98 |
6 |
31 |
Felix
Sabates |
479/500 |
Running |
4/14/02 |
38 |
22 |
Richard
Childress |
499/500 |
Running |
10/20/02 |
28 |
32 |
Richard
Childress |
498/500 |
Running |
4/13/03 |
35 |
26 |
Richard
Childress |
498/500 |
Running |
10/19/03 |
10 |
24 |
Petty
Enterprises |
498/500 |
Running |
4/18/04 |
33 |
24 |
Petty
Enterprises |
498/500 |
Running |
10/24/04 |
10 |
7 |
Petty
Enterprises |
500/500 |
Running |
4/10/05 |
14 |
22 |
Petty
Enterprises |
497/500 |
Running |
10/23/05 |
11 |
37 |
Petty
Enterprises |
409/500 |
Engine |
4/2/06 |
34 |
25 |
Haas CNC Racing |
491/500 |
Running |
10/22/06 |
8 |
8 |
Haas CNC Racing |
500/500 |
Running |
Haas CNC Racing- Martinsville Speedway Cup Series Statistics
Date |
Start |
Finish |
Driver |
Laps |
Status |
4/13/03 |
14 |
29 |
Jack
Sprague |
497/500 |
Running |
10/19/03 |
34 |
27 |
Jason
Leffler |
498/500 |
Running |
4/18/04 |
6 |
22 |
Ward
Burton |
499/500 |
Running |
10/24/04 |
4 |
28 |
Ward
Burton |
497/500 |
Running |
4/10/05 |
15 |
36 |
Mike
Bliss |
410/500 |
Overheating |
10/23/05 |
31 |
41 |
Mike
Bliss |
173/500 |
Crash |
4/2/06 |
34 |
25 |
Jeff Green |
491/500 |
Running |
10/22/06 |
8 |
8 |
Jeff Green |
500/500 |
Running |
|